CYCLONE C30

16-30 HP (12-22 KW)
540, 1000, 2000 rpm – cat. 1

The Cyclone C30 is a three-spindle mower suitable for tractors ranging from 16 to 30 HP. It is available in three models with working widths of 120, 150 or 180 cm.
The C30 have a rear discharge that allows the cut grass to be distributed equally across the entire cutting width.
The belt driven transmission with automatic spring tensioning makes it easier to operate and perform maintenance of this machine. The Cyclone range models are always equipped with axial grease fittings that allow the bearings of the blade spindles to be greased without removing the belt shields. Pulleys are individually balanced to ensure a perfect operation of the transmission.
The Cyclone C30 uses sturdy stamped and reinforced wheel arms and comes with a floating 3-point hitch that allows the mower to better track over uneven grounds.

Standard

Attacco a tre punti reversibile per applicazione frontale o posteriore

Reversible three point hitch for front or rear tractor mounting

Dual rear roller mounting position, inside or outside the cutting chamber

Gearboxes manufactured by Rotomec

Dual rear roller mounting position, inside or outside the cutting chamber

Stamped steel wheel arms attached by five bolts

Manual or hydraulic side-shift up to 40 cm

Hard or air tires

Manual or hydraulic side-shift up to 40 cm

Axial grease fittings for easy and accurate lubrication

Choice of fine cut blades, dethatching blades, reverse ‘Y’ blades, paddle blades or hammer type blades

Heavy duty reinforced belt (BX) with automatic belt tensioner

Technical features

HP 16-30
cm 120
cm 130
Kg 155
r.p.m. 3.037
m/s 67
N° 3
mm 25/100
N° 1 BX
N° – mm 4-210×80
1 3/8″ ASAE cat. 2
HP 20-30
cm 150
cm 157
Kg 170
r.p.m. 2.803
m/s 75
N° 3
mm 25/100
N° 1 BX
N° – mm 4-210×80
1 3/8″ ASAE cat. 2
HP 25-30
cm 180
cm 189
Kg 200
r.p.m. 2.278
m/s 74
N° 3
mm 25/100
N° 1 BX
N° – mm 4-210×80
1 3/8″ ASAE cat. 2

Optional equipment

0099696

1000 rpm clockwise transmission, additional

0099697

1000 rpm anticlockwise transmission, additional

0099698

2000 rpm clockwise transmission, additional

0099699

2000 rpm anticlockwise transmission, additional

0099549 C30-RD4

0099550 C30-RD5

0099551 C30-RD6

Mulching kit

0099536

Anti-scalp roller

0099626

Three point hitch cat. ‘1N’, additional

0099528

P.T.O. shaft tractor end yoke Z6x21x25, additional

0099570

4 air tires 230×90 mm, additional

0099792 C30-RD4

0099793 C30-RD5

0099794 C30-RD6

Triangular quick hitch (only female), additional

0099840

Triangular quick hitch kit for tractor

0099460B C30-RD4

0099461B C30-RD5

0099462B C30-RD6

Complete kit high lift blades

0099460F C30-RD4

0099461F C30-RD5

0099462F C30-RD6

Complete kit flat blades

Manuals

Operator’s manuals

Parts manuals

Other models

CYCLONE C30-CE5

10.5 HP (8 KW)
Briggs & Stratton

CYCLONE C28

16-28 HP (12-21 KW)
540, 1000, 2000 rpm
Cat. 1

CYCLONE C50

20-50 HP (15-37 KW)
540, 1000 rpm
Cat. 1

CYCLONE C70

30-70 HP (22-52 KW)
540, 1000 rpm
Cat. 1

CYCLONE FLEX

25-80 HP (19-60 KW)
540 rpm

CYCLONE SUPER-FLEX

35-80 HP (26-60 KW)
540 rpm

FRONT MOWERS