CYCLONE FLEX

25-80 HP (19-60 KW)
540 rpm

The Flex gang grooming mower consists of a frame-carrier mechanically and hydraulically connected to three rear discharge Cyclone C50 series mowers. Each mower works completely independent from the others thanks to a double pivot floating linkage that connects the frame to the mowers and allows them to follow the uneven terrain.
In addition, the Flex comes with telescopic arms that allow to increase or reduce the overlap of the mowers to obtain either a greater cutting width, or to improve the mower overlap in case of frequent tight turning radiuses.
The power transmission between the tractor and the gang grooming mower is done by means of a wide angle driveline with a slip clutch. This type of driveline allows the machine to perform very tight turns (zero turn radius) without damaging any of the components on the transmission.

Standard

Attacco a tre punti reversibile per applicazione frontale o posteriore

Double pivot floating linkage for a perfect cut on uneven terrain

Dual rear roller mounting position, inside or outside the cutting chamber

Telescopic wings that allow for adjustable cutting width to increase or decrease mower overlap

Manual or hydraulic side-shift up to 40 cm

Gearboxes, manufactured by Rotomec, equipped with spiral gears to increase strength and quietness

Manual or hydraulic side-shift up to 40 cm

Hexagonal yokes to prevent slippage on slopes hexagonales pour empêcher le glissement sur les pentes

Choice of fine cut blades, dethatching blades, reverse ‘Y’ blades, paddle blades or hammer type blades

Front antiscalping rollers

Technical features

HP 25-80
cm 360
Kg 1.222
9
mm 25/125
6 SPBX
N° – mm 12-280×100
1 3/8″ ASAE cat. 6

 

HP 30-80
cm 450
Kg 1.282
9
mm 25/125
6 SPBX
N° – mm 12-280×100
1 3/8″ ASAE cat. 6

 

HP 35-80
cm 510
Kg 1.337
9
mm 25/125
6 SPBX
N° – mm 12-280×100
1 3/8″ ASAE cat. 6

 

Optional equipment

0099817

Hydraulic assist unlocking kit

0099556 312-FLX

0099557 315-FLX

0099558 317-FLX

Mulching kit

0099596

Front turning hitch, additional

0099597

Front floating hitch, additional

0099703

12 hard tires 250×80 mm with ball bearings, additional

0099805

Road compliant kit 312-FLX, 315-FLX

0099945 312-FLX

0099946 315-FLX

0099947 317-FLX

Rear roller kit

0099464B 312-FLX

0099465B 315-FLX

0099466B 317-FLX

Complete kit high lift blades

0099464F 312-FLX

0099465F 315-FLX

0099466F 317-FLX

Complete kit flat blades

Manuals

Other models

CYCLONE C30-CE5

10.5 HP (8 KW)
Briggs & Stratton

CYCLONE C28

16-28 HP (12-21 KW)
540, 1000, 2000 rpm
Cat. 1

CYCLONE C30

16-30 HP (12-22 KW)
540, 1000, 2000 rpm
Cat. 1

CYCLONE C50

20-50 HP (15-37 KW)
540, 1000 rpm
Cat. 1

CYCLONE C70

30-70 HP (22-52 KW)
540, 1000 rpm
Cat. 1

CYCLONE SUPER-FLEX

35-80 HP (26-60 KW)
540 rpm

FRONT MOWERS